Telefon +49 231 755-5744/7978
Fax +49 231 755-2688
Sprechzeiten by appointment
Raum 102
Institute of Mechanics
Department of Mechanical Engineering
TU Dortmund
Leonhard-Euler-Strasse 5
D-44227 Dortmund
Mechanik I-IV
Mechanik
Maschinendynamik
Einführung in numerische Methoden
Einführung in die Materialtheorie
Tensorrechnung
Methode der Finiten Elemente I
Methode der Finiten Elemente II
Nichtlineare Finite-Elemente-Methoden
Continuum MechanicsMaterial ModellingComputational InelasticityBiomechanicsSmart Materials
2007A. MenzelFrontiers in Inelastic Continuum MechanicsHabilitation thesis, TU Kaiserslautern, UKL/LTM T 07-03, 2007 2002A. MenzelModelling and Computation of Geometrically Nonlinear Anisotropic InelasticityDissertation thesis, TU Kaiserslautern, UKL/LTM T 02-01, 2002
T. Kaiser, M.J. Cordill, C. Kirchlechner and A. MenzelElectric and mechanical behaviour of metal thin films with deformation-induced cracks predicted by computational homogenisationInternational Journal of Fracture,accepted for publication, 2021, open access
T. Bartel, G.-L. Geuken and A. MenzelA thermodynamically consistent modelling framework for strongly time-dependent bainitic phase transitionsInternational Journal of Solids and Structures,available online, 111172, 2021, open access
K.A. Meyer and A. MenzelA distortional hardening model for finite plasticityInternational Journal of Solids and Structures,available online, 111055, 2021, open access
T. Kaiser and A. MenzelA finite deformation electro-mechanically coupled computational multiscale formulation for electrical conductorsActa Mechanica,accepted for publication, 2021, open access
T. Kaiser and A. MenzelFundamentals of electro-mechanically coupled cohesive zone formulations for electrical conductorsComputational Mechanics,68, 51-67, 2021, open access
N. Waschinsky, F.-J. Barthold and A. MenzelStructural optimisation of diffusion driven degradation processesStructural and Multidisciplinary Optimization,available online, 2021, open access
T.T. Dereli, N. Schmidt, T. Furlan, R. Holtermann, D. Biermann and A. MenzelSimulation based prediction of compliance induced shape deviations in Internal Traverse GrindingJournal of Manufacturing and Materials Processing, 5, 2, 60, 2021, open access
C. Witt, T. Kaiser and A. MenzelA finite deformation isogeometric finite element approach to fibre-reinforced composites with fibre bending stiffnessJournal of Engineering Mathematics,128, 15, 2021, open access
T. Bartel, B. Kiefer and A. MenzelAn energy-relaxation-based framework for the modeling of magnetic shape memory alloys - Simulation of three-dimensional effects under homogeneous loading conditionsInternational Journal of Solids and Structures,208-209, 221-234, 2021
T. Kaiser and A. MenzelAn electro-mechanically coupled computational multiscale formulation for electrical conductorsArchive of Applied Mechanics,91, 1509-1526, 2021, open access
N. Schmidt, T.T. Dereli, T. Furlan, R. Holtermann, D. Biermann and A. MenzelTowards the prediction of compliance influences on shape deviations in Internal Traverse GrindingIn B.A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt and J.P. Wulfsberg, editors, WGP 2020: Production at the leading edge of technology, Lecture Notes in Production Engineering,304-314, Springer, 2021
L. Rose and A. MenzelIdentification of thermal material parameters for thermo-mechanically coupled material modelsMeccanica,56, 393-416, 2021, open access
T. Kaiser, S. Forest and A. MenzelA finite element implementation of the stress gradient theoryMeccanica,56, 1109-1128, 2021, open access
M. Schewe, H. Wilbuer and A. MenzelSimulation of wear and effective friction properties of microstructured surfacesWear,464-465, 203491, 2021, open access
M. Schewe and A. MenzelMechanism-based modelling of wear in sheet-bulk metal formingIn M. Merklein, A.E. Tekkaya, and B.A. Behrens, editors, Sheet Bulk Metal Forming, Lecture Notes in Production Engineering, 434–457, Springer, 2021
C. Witt, T. Kaiser and A. MenzelAn isogeometric finite element approach to fibre-reinforced composites with fibre bending stiffnessArchive of Applied Mechanics,91, 643-672, 2021, open access
I. Noll, T. Bartel and A. MenzelA computational phase transformation model for Selective Laser Melting processesComputational Mechanics,66, 1321-1342, 2020, open access
L. Sprave and A. MenzelA large strain gradient-enhanced ductile damage model – Finite element formulation, experiment and parameter identificationActa Mechanica,231, 12, 5159-5192, 2020, open access
T.T. Dereli, D. Biermann, A. Menzel, N. Schmidt, T. Furlan and R. HoltermannProzessoptimierung fuer das InnenrundschaelschleifenVDI-Z Integrierte Produktion, 162, 3, 25-27 2020
R. Schulte, R. Ostwald and A. MenzelGradient-enhanced modelling of damage for rate-dependent material behaviour – a parameter identification frameworkMaterials,13(14), 3156, 2020, open access
R. Penta, H. Dehghani, I. Noll, A. Menzel and J. MerodioThe role of microscale solid matrix compressibility on the mechanical behaviour of poroelastic materialsEuro. J. Mech. A/Solids,83, 103996, 2020, open access
L. Rose and A. MenzelOptimisation based material parameter identification using full field displacement and temperature measurementsMechanics of Materials,145, 103292, 2020Erratum151, 103630, 2020
T. Kaiser, J. Lu, A. Menzel and P. PapadopoulosA covariant formulation of finite plasticity with plasticity-induced evolution of anisotropy: modeling, algorithmics, simulation, and comparison to experimentsInternational Journal of Solids and Structures,185-186, 116-142, 2020
T. Bartel, B. Kiefer, K. Buckmann and A. MenzelAn energy-relaxation-based framework for the modelling of magnetic shape memory alloys - simulation of key response features under homogeneous loading conditionsInternational Journal of Solids and Structures, 182-183, 162-178, 2020
L. Sprave, A. Schowtjak, R. Meya, T. Clausmeyer, A.E. Tekkaya and A. MenzelOn mesh dependencies in finite-element-based damage prediction: Application to sheet metal bendingProduction Engineering,14, 123-134, 2020
F. Guhr, L. Sprave, F.-J. Barthold and A. MenzelComputational shape optimisation for a gradient-enhanced continuum damage modelComputational Mechanics,65, 1105-1124, 2020, open access
A. Menzel and L. SpraveContinuum damage mechanics - modelling and simulationin J. Merodio and R.W. Ogden, editors, Constitutive Modelling of Solid Continua, vol. 262 of Solid Mechanics and its Applications, Springer,231-256, 2020
T. Kaiser and A. MenzelA dislocation density tensor-based crystal plasticity frameworkJournal of the Mechanics and Physics of Solids,131, 276-302, 2019
T. Kaiser and A. MenzelAn incompatibility tensor-based gradient plasticity formulation - theory and numericsComputer Methods in Applied Mechanics and Engineering,345, 671-700, 2019
K. Buckmann, B. Kiefer, T. Bartel, and A. MenzelSimulation of magnetised microstructure evolution based on a micromagnetics-inspired FE-framework: A pplication to magnetic shape memory behaviourArchive of Applied Mechanics,89(6), 1085-1102, 2019
T. Bartel, R. Schulte, A. Menzel, B. Kiefer, and B. SvendsenInvestigations on enhanced Fischer-Burmeister NCP functions - application to a rate-dependent model for ferroelectricsArchive of Applied Mechanics,89(6), 995-1010, 2019
T. Bartel, I. Guschke, and A. MenzelTowards the simulation of Selective Laser Melting processes via phase transformation modelsComputers & Mathematics with Applications,78(7), 2267-2281, 2019
R. Berthelsen and A. MenzelComputational homogenisation of thermo-viscoplastic composites: Large strain formulation and weak micro-periodicityComputer Methods in Applied Mechanics and Engineering,348, 575-603, 2019
R. Ostwald, E. Kuhl, and A. MenzelOn the implementation of finite deformation gradient-enhanced damage modelsComputational Mechanics,64(3), 847-877, 2019
B. Wcislo, J. Pamin, K. Kowalczyk-Gajewska, and A.MenzelNumerical analysis of ellipticity condition for large strain plasticityAIP Conference Proceedings, 1922:140008, 2018
R. Brighenti, A. Menzel, and F.J. VernereyA physics-based micromechanical model for electroactive visco-ealstic polymersJournal of Intelligent Material Systems and Structures,29, 2902-2918, 2018
B. Kiefer, T. Waffenschmidt, L. Sprave and A. MenzelA gradient-enhanced damage model coupled to plasticity - multi-surface formulation and algorithmic conceptsInternational Journal of Damage Mechanics, 27, 253-295, 2018
D.J. Hartl, B. Kiefer, R. Schulte, and A. Menzel Computationally-efficient modeling of inelastic single crystal responses via anisotropic yield surfaces: applications to shape memory alloysInternational Journal of Solids and Structures, 136-137, 38-59, 2018
D.K. Dusthakar, A. Menzel, and B. SvendsenLaminate-based modelling of single- and polycrystalline ferroelectric materials - application to tetragonal barium titanateMechanics of Materials, 117, 235-254, 2018
R. Holtermann, S. Schumann, A. Menzel, and D. BiermannModelling and simulation of internal traverse grinding - from micro-thermo-mechanical mechanisms to process modelsIn D. Biermann and F. Hollmann, editors, Thermal Effects in Complex Machining Processes, Lecture Notes in Production Engineering, 369–403, Springer, 2018
2017
R. Berthelsen, R. Denzer, P. Oppermann and A. MenzelComputational homogenisation for thermoviscoplasticity: application to thermally sprayed coatingsComputational Mechanics,60, 739-766, 2017
T. Asmanoglo and A. MenzelFibre-reinforced composites with fibre-bending stiffness under azimuthal shear – Comparison of simulation results with analytical solutionsInternational Journal of Non-Linear Mechanics,91, 128-139, 2017T. Asmanoglo and A. MenzelA multi-field finite element approach for the modelling of fibre-reinforced composites with fibre-bending stiffnessComputer Methods in Applied Mechanics and Engineering,317, 1037-1067, 2017C. Polindara, T. Waffenschmidt and A. MenzelA computational framework for modelling damage-induced softening in fibre-reinforced materials – application to balloon angioplastyInternational Journal of Solids and Structures,118-119, 235-256, 2017T. Asmanoglo and A. MenzelA finite deformation continuum modelling framework for curvature effects in fibre-reinforced nanocompositesJournal of the Mechanics and Physics of Solids,107, 411-432, 2017S. Thylander, A. Menzel, M. Ristinmaa, S. Hall, and J. EngqvistElectro-viscoelastic response of an acrylic elastomer analysed by digital image correlationSmart Materials and Structures,26, 085021, 2017
S. Thylander, A. Menzel and M. RistinmaaA non-affine electro-viscoelastic microsphere model for dielectric elastomers: application to VHB 4910 based actuatorsJournal of Intelligent Material Systems and Structures,28, 627-639, 2017
T. Bartel, M. Osman and A. MenzelA phenomenological model for the simulation of functional fatigue in shape memory alloy wiresMeccanica,52, 973-988, 2017 2016T. Bartel and A. MenzelModelling and simulation of cyclic thermomechanical behaviour of NiTi wires using a weak discontinuity approachInt. J. Fracture,202, 2, 281-293, 2016E. Bortot, R. Denzer, A. Menzel and M. GeiAnalysis of viscoelastic soft dielectric elastomer generators operating in an electrical circuitInternational Journal of Solids and Structures,78-79, 205-215, 2016R. Berthelsen, D. Tomath, R. Denzer and A. MenzelFinite element simulation of coating-induced heat transfer: application to thermal spraying processesMeccanica,51, 2, 291-307, 2016C. Polindara, T. Waffenschmidt and A. MenzelSimulation of balloon angioplasty in residually stressed blood vessels-Application of a gradient-enhanced fibre damage model.Journal of Biomechanics, 49, 12, 2341-2348, 2016T. Waffenschmidt, M. Cilla, P. Sáez, M. Pérez, M. Martínez, A. Menzel and E. PeñaTowards the modelling of ageing and atherosclerosis effects in ApoE(-/-) mice aortic tissue.Journal of Biomechanics, 49, 12, 2390-2397, 2016S. Thylander, A. Menzel and M. RistinmaaTowards control of viscous effects in acrylic-based actuator applicationsSmart Materials and Structures,25, 9, 095034, 2016K. Haldar, B. Kiefer and A. MenzelFinite element simulation of rate-dependent magneto-active polymer responseSmart Materials and Structures,25, 10, 104003, 2016R. Berthelsen, H. Wilbuer, R. Holtermann and A. MenzelComputational modelling of wear - application to structured surfaces of elastoplastic toolsGAMM-Mitteilungen,39, 2, 210-228, 2016N. Cohen, A. Menzel and G. deBottonTowards a physics-based multiscale modelling of the electro-mechanical coupling in electro-active polymers.Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science,472, 2186, 20150462, 2016D. Biermann, R. Holtermann, A. Menzel and S. SchumannModelling and simulation of thermal effects in internal traverse grinding of hardened bearing steel.CIRP Annals - Manufacturing Technology,65, 1, 321-324, 2016R. Holtermann, S. Schumann, A. Zabel, D. Biermann and A. MenzelNumerical Determination of Process Values Influencing the Surface Integrity in Grinding.Procedia CIRP,45, 39-42, 2016S. Maniprakash, A. Arockiarajan and A. MenzelA multi-surface model for ferroelectric ceramics - application to cyclic electric loading with changing maximum amplitude.Philosophical Magazine,96, 13, 1263-1284, 2016S. Maniprakash, R. Jayendiran, A. Menzel and A. ArockiarajanExperimental investigation, modelling and simulation of rate-dependent response of 1–3 ferroelectric composites.Mechanics of Materials,94, 91-105, 2016 2015J. Kaliappan and A. MenzelModelling of non-linear switching effects in piezoceramics: a three-dimensional polygonal finite-element-based approach applied to oligo-crystalsJournal of Intelligent Material Systems and Structures,26, 17, 2322-2337, 2015C. Valero, E. Javierre, J. García-Aznar, A. Menzel and M. Gómez-BenitoChallenges in the Modeling of Wound Healing Mechanisms in Soft Biological TissuesAnnals of Biomedical Engineering,43, 7, 1654-1665, 2015T. Bartel, B. Kiefer, K. Buckmann and A. MenzelA kinematically-enhanced relaxation scheme for the modeling of displacive phase transformationsJournal of Intelligent Material Systems and Structures,26, 6, 701-717, 2015T. Waffenschmidt, C. Polindara and A. MenzelA Gradient-Enhanced Continuum Damage Model for Residually Stressed Fibre-Reinforced Materials at Finite StrainsBiomedical Technology,74, 19-40, 2015R. Ostwald, T. Bartel and A. MenzelAn energy-barrier-based computational micro-sphere model for phase-transformations interacting with plasticityComputer Methods in Applied Mechanics and Engineering,293, 232-265, 2015E. Peraza Hernandez, B. Kiefer, D. Hartl, A. Menzel and D. LagoudasAnalytical investigation of structurally stable configurations in shape memory alloy-actuated platesInternational Journal of Solids and Structures,69-70, 442-458, 2015D. Dusthakar, A. Menzel and B. SvendsenComparison of phenomenological and laminate-based models for rate-dependent switching in ferroelectric continuaGAMM-Mitteilungen,38, 1, 147-170, 2015A. Ask, A. Menzel and M. RistinmaaModelling of Viscoelastic Dielectric Elastomers with Deformation Dependent Electric PropertiesProcedia IUTAM,12, 134-144, 2015C. Valero, E. Javierre, J. García-Aznar, M. Gómez-Benito and A. MenzelModeling of anisotropic wound healingJournal of the Mechanics and Physics of Solids,79, 80-91, 2015R. Holtermann, A. Menzel, S. Schumann, D. Biermann, T. Siebrecht and P. KerstingModelling and simulation of Internal Traverse Grinding: bridging meso- and macro-scale simulationsProd. Eng. Res. Devel., 9, 451-463, 2015V. Schulze, E. Uhlmann, R. Mahnken, A. Menzel, D. Biermann, A. Zabel, P. Bollig, I. Ivanov, C. Cheng, R. Holtermann and T. BartelEvaluation of different approaches for modeling phase transformations in machining simulationProd. Eng. Res. Devel., 9, 437-449, 2015S. Schumann, T. Siebrecht, P. Kersting, D. Biermann, R. Holtermann and A. MenzelDetermination of the Thermal Load Distribution in Internal Traverse Grinding using a Geometric-Kinematic SimulationProcedia CIRP,31, 322-327, 2015 2014R. Denzer and A. MenzelConfigurational forces for quasi-incompressible large strain electro-viscoelasticity – Application to fracture mechanicsEuropean Journal of Mechanics - A/Solids,48, 3-15, 2014R. Berthelsen, T. Wiederkehr, R. Denzer, A. Menzel and H. MüllerEfficient Simulation of Nonlinear Heat Transfer during Thermal Spraying of Complex WorkpiecesWorld Journal of Mechanics,04, 09, 289-301, 2014S. Göktepe, A. Menzel and E. KuhlThe generalized Hill model: A kinematic approach towards active muscle contractionJ Mech Phys Solids, Journal of the Mechanics and Physics of Solids,72, 20-39, 2014R. Ostwald, T. Bartel and A. MenzelA Gibbs-energy-barrier-based computational micro-sphere model for the simulation of martensitic phase-transformationsInternational Journal for Numerical Methods in Engineering,97, 12, 851-877, 2014T. Waffenschmidt and A. MenzelExtremal states of energy of a double-layered thick-walled tube – Application to residually stressed arteriesJ Mech Behav Biomed Mater, Journal of the Mechanical Behavior of Biomedical Materials,29, 635-654, 2014T. Waffenschmidt, C. Polindara, A. Menzel and S. BlancoA gradient-enhanced large-deformation continuum damage model for fibre-reinforced materialsComputer Methods in Applied Mechanics and Engineering,268, 801-842, 2014R. Ostwald, M. Tiffe, T. Bartel, A. Zabel, A. Menzel and D. BiermannTowards the multi-scale simulation of martensitic phase-transformations: An efficient post-processing approach applied to turning processesJournal of Materials Processing Technology,214, 8, 1516-1523, 2014 2013A. Ask, R. Denzer, A. Menzel and M. RistinmaaInverse-motion-based form finding for quasi-incompressible finite electroelasticityInternational Journal for Numerical Methods in Engineering,94, 6, 554-572, 2013R. Holtermann, S. Schumann, A. Menzel and D. BiermannModelling, simulation and experimental investigation of chip formation in internal traverse grindingProduction Engineering,7, 2-3, 251-263, 2013 2012A. Ask, A. Menzel and M. RistinmaaElectrostriction in electro-viscoelastic polymersMechanics of Materials,50, 9-21, 2012A. Ask, A. Menzel and M. RistinmaaPhenomenological modeling of viscous electrostrictive polymersInternational Journal of Non-Linear Mechanics,47, 2, 156-165, 2012T. Bartel and A. MenzelPartially relaxed energy potentials for the modelling of microstructures - application to shape memory alloysGAMM-Mitteilungen,35, 1, 59-74, 2012T. Waffenschmidt, A. Menzel and E. KuhlAnisotropic density growth of bone—A computational micro-sphere approachInternational Journal of Solids and Structures,49, 14, 1928-1946, 2012T. Waffenschmidt and A. MenzelApplication of an anisotropic growth and remodelling formulation to computational structural designMechanics Research Communications,42, 77-86, 2012R. Ostwald, T. Bartel and A. MenzelPhase-transformations interacting with plasticity – A micro-sphere model applied to TRIP steelComputational Materials Science,64, 12-16, 2012K. Jayabal and A. MenzelVoronoi-based three-dimensional polygonal finite elements for electromechanical problemsComputational Materials Science,64, 66-70, 2012S. Thylander, A. Menzel and M. RistinmaaAn electromechanically coupled micro-sphere framework: application to the finite element analysis of electrostrictive polymersSmart Materials and Structures,21, 9, 094008, 2012B. Kiefer, T. Bartel and A. MenzelImplementation of numerical integration schemes for the simulation of magnetic SMA constitutive responseSmart Materials and Structures,21, 9, 094007, 2012A. Menzel and E. KuhlFrontiers in growth and remodelingMechanics Research Communications,42, 1-14, 2012 2011T. Bartel, A. Menzel and B. SvendsenThermodynamic and relaxation-based modeling of the interaction between martensitic phase transformations and plasticityJournal of the Mechanics and Physics of Solids,59, 5, 1004-1019, 2011K. Jayabal, A. Menzel, A. Arockiarajan and S. SrinivasanMicromechanical modelling of switching phenomena in polycrystalline piezoceramics: application of a polygonal finite element approachComputational Mechanics,48, 4, 421-435, 2011R. Ostwald, T. Bartel and A. MenzelA one-dimensional computational model for the interaction of phase-transformations and plasticityInt. J. of Structural Changes in Solids, 3, 63-82, 2011K. Jayabal and A. MenzelApplication of the polygonal finite elements to two-dimensional mechanical and electro-mechanically coupled problemsComputer Modeling in Engineering & Sciences, 73, 183-208, 2011D. Biermann, A. Menzel, T. Bartel, F. Höhne, R. Holtermann, R. Ostwald, B. Sieben, M. Tiffe and A. ZabelExperimental and Computational Investigation of Machining Processes for Functionally Graded MaterialsProcedia Engineering,19, 22-27, 2011R. Ostwald, T. Bartel and A. MenzelInteraction of phase-transformations and plasticity - a multi-phase micro-sphere approachPAMM,11, 1, 417-418, 2011 2010R. Ostwald, T. Bartel and A. MenzelA computational micro-sphere model applied to the simulation of phase-transformationsZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik,90, 7-8, 605-622, 2010A. Ask, A. Menzel and M. RistinmaaOn the modelling of electro-viscoelastic response of electrostrictive polyurethane elastomersIOP Conference Series: Materials Science and Engineering,10, 012101, 2010E. Kuhl, A. Menzel and K. GarikipatiOn the convexity of transversely isotropic chain network models†Philosophical Magazine,86, 21-22, 3241-3258, 2010 2009A. Menzel and T. WaffenschmidtA microsphere-based remodelling formulation for anisotropic biological tissuesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,367, 1902, 3499-3523, 2009T. Bartel, A. Menzel and B. SvendsenEnhanced Micromechanical Modelling of Martensitic Phase-Transitions Considering Plastic DeformationsEDP Sciences, ESOMAT 2009 - 8th European Symposium on Martensitic Transformations,7, 2009V. Alastrué, M. Martínez, M. Doblaré and A. MenzelAnisotropic micro-sphere-based finite elasticity applied to blood vessel modellingJournal of the Mechanics and Physics of Solids,57, 1, 178-203, 2009V. Alastrué, M. Martínez, A. Menzel and M. DoblaréOn the use of non-linear transformations for the evaluation of anisotropic rotationally symmetric directional integrals. Application to the stress analysis in fibred soft tissuesInternational Journal for Numerical Methods in Engineering,79, 4, 474-504, 2009B. Svendsen, P. Neff and A. MenzelOn constitutive and configurational aspects of models for gradient continua with microstructureZAMM,89, 8, 687-697, 2009M. Harrysson, M. Ristinmaa, M. Wallin and A. MenzelFramework for deformation induced anisotropy in glassy polymersActa Mechanica,211, 3-4, 195-213, 2009A. Menzel and B. SvendsenTwo configurational approaches on the modelling of continuum dislocation inelasticityThe International Journal of Structural Changes in Solids,1, 1, 61-72, 2009 2008R. Mohr, A. Menzel and P. SteinmannA consistent time FE-method for large strain elasto-plasto-dynamicsComputer Methods in Applied Mechanics and Engineering,197, 33-40, 3024-3044, 2008G. Himpel, A. Menzel, E. Kuhl and P. SteinmannTime-dependent fibre reorientation of transversely isotropic continua—Finite element formulation and consistent linearizationInternational Journal for Numerical Methods in Engineering,73, 10, 1413-1433, 2008J. Utzinger, M. Bos, M. Floeck, A. Menzel, E. Kuhl, R. Renz, K. Friedrich, A. Schlarb and P. SteinmannComputational modelling of thermal impact welded PEEK/steel single lap tensile specimensComputational Materials Science,41, 3, 287-296, 2008R. Mohr, A. Menzel and P. SteinmannGalerkin-based mechanical integrators for finite elastodynamics formulated in principal stretches – Pitfalls and remediesComputer Methods in Applied Mechanics and Engineering,197, 49-50, 4444-4466, 2008A. Menzel, A. Arockiarajan and S. SivakumarTwo models to simulate rate-dependent domain switching effects—application to ferroelastic polycrystalline ceramicsSmart Materials and Structures,17, 1, 015026, 2008J. Utzinger, A. Menzel, P. Steinmann and A. BenallalAspects of bifurcation in an isotropic elastic continuum with orthotropic inelastic interfaceEuropean Journal of Mechanics - A/Solids,27, 4, 532-547, 2008A. Menzel, M. Harrysson and M. RistinmaaTowards an orientation-distribution-based multi-scale approach for remodelling biological tissuesComputer Methods in Biomechanics and Biomedical Engineering,11, 5, 505-524, 2008J. Utzinger, P. Steinmann and A. MenzelOn the simulation of cohesive fatigue effects in grain boundaries of a piezoelectric mesostructureInternational Journal of Solids and Structures,45, 17, 4687-4708, 2008J. Utzinger, P. Steinmann and A. MenzelComputational modelling of microcracking effects in polycrystalline piezoelectric ceramicsGAMM-Mitteilungen,31, 2, 151-165, 2008A. Menzel, J. Utzinger and A. ArockiarajanNonlinear piezoelectric effects - towards physics-based computational modelling of micro-cracking, fatigue and switchingSmart Devices: Modeling of Material Systems, 1029, 209-220, 2008R. Mohr, S. Uhlar, A. Menzel and P. SteinmannTime-FE Methods for the Nonlinear Dynamics of Constrained Inelastic SystemsIUTAM Symposium on Theoretical, Computational and Modelling Aspects of Inelastic Media,11, 275-285, 2008 2007P. Herzenstiel, R. Ching, S. Ricker, A. Menzel, P. Steinmann and J. AurichInteraction of process and machine during high-performance grinding: towards a comprehensive simulation conceptInternational Journal of Manufacturing Technology and Management,12, 1/2/3, 155, 2007A. Arockiarajan, A. Menzel, B. Delibas and W. SeemannMicromechanical Modeling of Switching Effects in Piezoelectric Materials A Robust Coupled Finite Element ApproachJournal of Intelligent Material Systems and Structures,18, 9, 983-999, 2007A. Menzel and P. SteinmannOn configurational forces in multiplicative elastoplasticityInternational Journal of Solids and Structures,44, 13, 4442-4471, 2007B. Kleuter, A. Menzel and P. SteinmannGeneralized parameter identification for finite viscoelasticityComputer Methods in Applied Mechanics and Engineering,196, 35-36, 3315-3334, 2007A. Arockiarajan, A. Menzel and W. SeemannConstitutive modelling of rate-dependent domain switching effects in ferroelectric and ferroelastic materialsJournal of Electroceramics,20, 3-4, 159-165, 2007A. Arockiarajan and A. MenzelOn the modelling of rate-dependent domain switching in piezoelectric materials under superimposed stressesComputer Modeling in Engineering & Sciences, 19, 163-180, 2007 2006M. Ekh and A. MenzelEfficient iteration schemes for anisotropic hyperelasto-plasticityInternational Journal for Numerical Methods in Engineering,66, 4, 707-721, 2006A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannStudies on rate-dependent switching effects of piezoelectric materials using a finite element modelComputational Materials Science,37, 3, 306-317, 2006A. MenzelRelations between material, intermediate and spatial generalized strain measures for anisotropic multiplicative inelasticityActa Mechanica,182, 3-4, 231-252, 2006A. Arockiarajan, A. Menzel, B. Delibas and W. SeemannComputational modeling of rate-dependent domain switching in piezoelectric materialsEuropean Journal of Mechanics - A/Solids,25, 6, 950-964, 2006E. Kuhl, R. Maas, G. Himpel and A. MenzelComputational modeling of arterial wall growthBiomech Model Mechanobiol, Biomechanics and Modeling in Mechanobiology,6, 5, 321-331, 2006A. MenzelA fibre reorientation model for orthotropic multiplicative growthBiomech Model Mechanobiol, Biomechanics and Modeling in Mechanobiology,6, 5, 303-320, 2006A. MenzelAdaptation of biological tissues — a fibre reorientation model for orthotropic multiplicative growthIII European Conference on Computational Mechanics,271-271, 2006 2005A. Menzel, M. Ekh, K. Runesson and P. SteinmannA framework for multiplicative elastoplasticity with kinematic hardening coupled to anisotropic damageInternational Journal of Plasticity,21, 3, 397-434, 2005A. Menzel, R. Denzer and P. SteinmannMaterial forces in computational single-slip crystal-plasticityComputational Materials Science,32, 3-4, 446-454, 2005G. Johansson, A. Menzel and K. RunessonModeling of anisotropic inelasticity in pearlitic steel at large strains due to deformation induced substructure evolutionEuropean Journal of Mechanics - A/Solids,24, 6, 899-918, 2005A. Menzel and P. SteinmannA note on material forces in finite inelasticityArchive of Applied Mechanics,74, 11-12, 800-807, 2005G. Himpel, E. Kuhl, A. Menzel and P. SteinmannComputational modelling of isotropic multiplicative growthComputer Modeling in Engineering & Sciences, 8, 119-134, 2005 2004A. Menzel, R. Denzer and P. SteinmannOn the comparison of two approaches to compute material forces for inelastic materials. Application to single-slip crystal-plasticityComputer Methods in Applied Mechanics and Engineering,193, 48-51, 5411-5428, 2004A. Menzel, P. Betsch, E. Stein and P. SteinmannKonzepte der Numerik endlicher RotationenTechnische Mechanik, 24, 1, 61-66, 2004A. MenzelModelling of anisotropic growth in biological tissuesBiomech Model Mechanobiol, Biomechanics and Modeling in Mechanobiology,3, 3, 147-171, 2004 2003A. Menzel and P. SteinmannA view on anisotropic finite hyper-elasticityEuropean Journal of Mechanics - A/Solids,22, 1, 71-87, 2003A. Menzel and P. SteinmannOn the spatial formulation of anisotropic multiplicative elasto-plasticityComputer Methods in Applied Mechanics and Engineering,192, 31-32, 3431-3470, 2003A. Menzel and P. SteinmannGeometrically non-linear anisotropic inelasticity based on fictitious configurations: Application to the coupling of continuum damage and multiplicative elasto-plasticityInternational Journal for Numerical Methods in Engineering,56, 14, 2233-2266, 2003T. Liebe, A. Menzel and P. SteinmannTheory and numerics of geometrically non-linear gradient plasticityInternational Journal of Engineering Science,41, 13-14, 1603-1629, 2003M. Ekh, A. Menzel, K. Runesson and P. SteinmannAnisotropic damage with the MCR effect coupled to plasticityInternational Journal of Engineering Science,41, 13-14, 1535-1551, 2003E. Kuhl, A. Menzel and P. SteinmannComputational modeling of growthComputational Mechanics,32, 1-2, 71-88, 2003 2002A. Menzel, M. Ekh, P. Steinmann and K. RunessonAnisotropic damage coupled to plasticity: Modelling based on the effective configuration conceptInternational Journal for Numerical Methods in Engineering,54, 10, 1409-1430, 2002 2001A. Menzel and P. SteinmannA theoretical and computational framework for anisotropic continuum damage mechanics at large strainsInternational Journal of Solids and Structures,38, 52, 9505-9523, 2001A. Menzel and P. SteinmannOn the comparison of two strategies to formulate orthotropic hyperelasticityJournal of Elasticity,62, 3, 171-201, 2001A. Menzel and P. SteinmannOn the theory and computation of anisotropic damage at large strainsRevue européenne des éléments finis, 10, 369-383, 2001 2000A. Menzel and P. SteinmannOn the continuum formulation of higher gradient plasticity for single and polycrystalsJournal of the Mechanics and Physics of Solids,48, 8, 1777-1796, 2000 1998A. Menzel and P. SteinmannOn the formulation of higher gradient single and polycrystal plasticityLe Journal de Physique IV,08, PR8, Pr8-239-Pr8-247, 1998P. Betsch, A. Menzel and E. SteinOn the parametrization of finite rotations in computational mechanics: A classification of concepts with application to smooth shellsComputer Methods in Applied Mechanics and Engineering,155, 3-4, 273-305, 1998A. Menzel, P. Betsch, E. Stein and P. SteinmannZur Formulierung und Numerik der Statik und Dynamik von Schalen bei endlichen DeformationenBauingenieur, 73, 283-291, 1998
2017T. Asmanoglo, J. Lu, A. Menzel and P. PapadopoulosOn the modelling of evolving material symmetries in finite strain plastic deformationsProceedings of the 7th GACM Colloquium on Computational Mechanics,773-776, 2017T. Asmanoglo and A. MenzelOn the modelling of curvature effects in fibre-reinforced nanocompositesPAMM,2017 2016R. Ostwald, T. Bartel and A. MenzelA thermodynamically consistent finite strain micro-sphere framework for phase-transformations.ECCOMAS Congress 2016, European Congress on Computational Methods in Applied Sciences and Engineering, full paper.,2016L. Sprave, B. Kiefer and A. MenzelComputational aspects of transient diffusion-driven swellingProceedings of 29th Nordic Seminar on Computational Mechanics– NSCM29, 2016T. Asmanoglo and A. MenzelA coupled finite element approach for the modelling of composites with fibres possessing fibre-bending stiffnessPAMM,16, 1, 299-300, 2016B. Kiefer, T. Waffenschmidt, L. Sprave and A. MenzelA Comparison of Algorithmic Approaches to Damage-Plasticity Modeling in the Context of Gradient-EnhancementPAMM,16, 1, 147-148, 2016K. Buckmann, B. Kiefer, T. Bartel and A. MenzelTowards the Embedding of Relaxation-based Magnetostriction Models into a Micromagnetically-Motivated Finite Element FrameworkPAMM,16, 1, 433-434, 2016D. Dusthakar, A. Menzel and B. SvendsenA laminate-based framework for switching and microstructure evolution in polycrystalline ferroelectricsPAMM,16, 1, 323-324, 2016R. Ostwald, T. Bartel and A. MenzelExtending a finite strain hyperelastic micro-sphere framework towards phase transformationsPAMM,16, 1, 381-382, 2016 2015K. Buckmann, B. Kiefer, T. Bartel and A. MenzelRank-One Convexification Approach for the Modeling of Magnetic Shape Memory ResponsePAMM,15, 1, 311-312, 2015D. Dusthakar, A. Menzel and B. SvendsenA laminate-based modelling approach for rate-dependent switching in ferroelectric materialsPAMM,15, 1, 3-6, 2015R. Berthelsen, D. Tomath, R. Denzer and A. MenzelTowards a finite element simulation of coating by means of thermal sprayingPAMM,15, 1, 277-278, 2015R. Ostwald, T. Bartel and A. MenzelA framework for the simulation of phase-transforming elasto-plastic SMA and TRIP steel polycrystalsProceedings of the 3rd Polish Congress of Mechanics/21st International Conference on Computer Methods in Mechanics (PCM/CMM),2015M. Osman, T. Bartel and A. MenzelNumerical Modeling of Functional Fatigue in NiTi WiresPAMM,15, 1, 341-342, 2015B. Kiefer, K. Haldar and A. MenzelModeling, Simulation and Parameter Identification for Rate-Dependent Magnetoactive Polymer Response.PAMM,15, 1, 395-396, 2015 2014T. Waffenschmidt, C. Polindara and A. MenzelA gradient-enhanced continuum damage model for fibre-reinforced materials at finite strainsPAMM,14, 1, 153-154, 2014B. Kiefer, K. Buckmann, T. Bartel and A. MenzelModeling of Single Crystal Magnetostriction Based on Numerical Energy Relaxation TechniquesVolume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Structural Health Monitoring; Keynote Presentation,V001T03A007, 2014K. Haldar, B. Kiefer and A. MenzelModeling and Simulation of Rate-Dependent Magneto-Active PolymersPAMM,14, 1, 401-402, 2014K. Buckmann, B. Kiefer, T. Bartel and A. MenzelModeling of Single Crystal Magnetostriction Based on Numerical Energy Relaxation TechniquesPAMM,14, 1, 399-400, 2014R. Holtermann, A. Menzel, S. Schumann and D. BiermannA two-scale simulation framework for Internal Traverse GrindingPAMM,14, 1, 321-322, 2014D. Dusthakar, T. Bartel, B. Kiefer, A. Menzel and B. SvendsenRate-Dependent Laminate-Based Approach for Modelling of Ferroelectric Single CrystalsProceedings of the 5th International Congress on Computational Mechanics and Simulation,1324-1336, 2014D. Dusthakar, A. Menzel and B. SvendsenLaminate-based modelling of microstructure and switching in ferroelectricsPAMM,14, 1, 407-408, 2014R. Berthelsen, R. Denzer and A. MenzelThermo-mechanical homogenisation - application to HVOF thermal-sprayed WC-Co coatingsPAMM,14, 1, 583-584, 2014S. Thylander, A. Menzel and M. RistinmaaA non-affine micro-sphere formulation for electroactive polymersPAMM,14, 1, 581-582, 2014E. Bortot, R. Denzer, A. Menzel and M. GeiAnalysis of a viscous soft dielectric elastomer generator operating in an electrical circuitPAMM,14, 1, 511-512, 2014K. Haldar, B. Kiefer and A. MenzelConstitutive Modeling of Magneto-Viscous PolymersProceedings (extended abstract) of the 14th Pan-American Congress of Applied Mechanics (PACAM XIV), 2014R. Holtermann, S. Schumann, A. Menzel and D. BiermannA Hybrid Approach to the Modelling and Simulation of Grinding ProcessesProceedings of the 11th World Congress on Computational Mechanics (WCCM XI), 1932-1937, 2014R. Holtermann, A. Menzel, S. Schumann and D. BiermannA two-scale simulation framework for Internal Traverse GrindingPAMM · Proc. Appl. Math. Mech., PAMM,14, 1, 321-322, 2014K. Buckmann, B. Kiefer, T. Bartel and A. MenzelModeling of Single Crystal Magnetostriction Based on Numerical Energy Relaxation TechniquesProceedings of the Second Seminar on the Mechanics of Multifunctional Materials, 2014D. Dusthakar, A. Menzel and B. SvendsenFree energy models for ferroelectric materials with application to rate-dependent switchingProc. 2nd Seminar on The Mechanics of Multifunctional Materials (SMMM2), Bad Honnef, Germany,11-13, 2014A. Menzel, R. Denzer, A. Ask and M. RistinmaaOn inverse-motion-based from finding and configurational mechanics for electro-active polymers.In J. Schröder, D.C. Lupascu, M.-A. Keip, and D. Brands, editors, Proceedings of the Second Seminar on The Mechanics of Multifunctional Materials, 75-78, 2014 2013T. Bartel, K. Buckmann, B. Kiefer and A. MenzelAn Advanced Energy Relaxation Scheme for the Modeling of Displacive Phase TransformationsVolume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation,V001T03A013, 2013S. Göktepe, A. Menzel and E. KuhlMicro-structurally Based Kinematic Approaches to Electromechanics of the HeartIUTAM Book Series, Computer Models in Biomechanics,175-187, 2013D. Hartl, B. Kiefer and A. MenzelModeling Shape Memory Alloy Single Crystalline Responses Using an Anisotropic Yield SurfaceL. Breese P. Warren, eds.; TMS 2013 Conference Proceedings, TMS2013 Supplemental Proceedings,975-986, 2013R. Berthelsen, R. Denzer and A. MenzelThermo-mechanical homogenization of HVOF thermal-sprayed WC-Co coatings20th International Conference on Computer Methods in Mechanics, Poznan / Poland,2013 2012T. Waffenschmidt and A. MenzelApplication of an anisotropic growth formulation to computational structural designPAMM,12, 1, 285-286, 2012R. Ostwald, T. Bartel and A. MenzelSimulation of phase-transformations based on numerical minimization of intersecting Gibbs energy potentialsPAMM,12, 1, 277-278, 2012R. Holtermann and A. MenzelTowards the simulation of Internal Traverse Grinding - from mesoscale modelling to process simulationsPAMM,12, 1, 287-288, 2012R. Ostwald, T. Bartel and A. MenzelA multi-scale model for the interaction of phase-transformations and plasticity in polycrystalline solidsProceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), submitted for publication, 2012R. Ostwald, T. Bartel, A. Menzel, M. Tiffe, D. Biermann, M. Lebsanft and B. ScholtesModelling and Simulation of Phase-Transformations and Plasticity in SteelProceedings of the 1st International Conference on Thermo-Mechanically Graded Materials, (ISBN: 978-3-942267-58-8), 109-114, 2012A. Ask, R. Denzer, A. Menzel and M. RistinmaaThe inverse motion problem for quasi-incompressible electroelasticityProceedings of NSCM-25, 189-192, 2012A. Ask, R. Denzer, A. Menzel and M. RistinmaaInverse-Motion-Based Modeling for Electromechanics With Application to Electrostrictive PolyurethaneSMASIS 2012 - Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Volume 2: Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Bio-Inspired Materials and Systems; Energy Harvesting,167-173, 2012 2011T. Waffenschmidt and A. MenzelA micro-sphere-based remodelling formulation for arterial tissue including residual stressesPAMM,11, 1, 131-132, 2011R. Holtermann, A. Menzel, C. Hortig and B. SvendsenTowards the simulation of grinding processes - a thermoplastic single grain approachPAMM,11, 1, 385-386, 2011A. Ask, M. Ristinmaa, A. Menzel and R. DenzerElectromechanics of polyurethane elastomersProceedings of NSCM-24, 200-203, 2011 2010A. Menzel, T. Waffenschmidt and V. AlastruéAn anisotropic micro-sphere approach applied to the modelling of soft biological tissuesIn: G. Kreiss et al. (eds.), Numerical Mathematics and Advanced Applications, 2, 637-644, 2010T. Waffenschmidt and A. MenzelOn a micro-sphere based remodelling formulation for orthotropic soft biological tissuePAMM,10, 1, 747-748, 2010R. Ostwald, T. Bartel and A. MenzelA micro-sphere approach applied to the modelling of phase-transformationsPAMM,10, 1, 315-316, 2010J. Kaliappan, A. Menzel, A. Arunachalakasi and S. M SrinivasanA micromechanically motivated model for ferroelectrics combined with polygonal finite elementsPAMM,10, 1, 299-300, 2010K. Jayabal, A. Arockiarajan, A. Menzel and S. SivakumarMulti-Axial Behavior of Ferroelectrics with Two Types of Micro–Macro Mechanical ModelsIUTAM Symposium on Multi-Functional Material Structures and Systems,95-102, 2010V. Palnau, C. Hortig, B. Klusemann, T. Bartel, B. Svendsen and A. MenzelMultiscale material modelling1st International Conference on Product Property Prediction, Dortmund, Germany, 2010R. Ostwald, T. Bartel and A. MenzelA micro-sphere approach applied to the simulation of phase transformations interacting with plasticityProceedings of the 23rd Nordic Seminar on Computational Mechanics (NSCM-23),, 157-160, 2010 2009T. Waffenschmidt and A. MenzelA micro-sphere-based remodelling formulation for anisotropic biological tissuesPAMM,9, 1, 151-152, 2009A. Menzel and T. WaffenschmidtRemodelling of anisotropic biological tissues. A computational micro-sphere approachProceedings of the International Conference on Computational Plasticity COMPLAS X, 2009K. Jayabal, A. Menzel, A. Arockiarajan and S. SrinivasanMicromechanically motivated finite element model for ferroelectric ceramicsPAMM,9, 1, 327-328, 2009A. Menzel and B. SvendsenOn Configurational Aspects of Finite Deformation Inelasticity: A Variational Approach Versus the Transformation of Balance of MomentumIUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics,17, 37-46, 2009T. Bartel, A. Menzel and B. SvendsenEnhanced Micromechanical Modelling of Martensitic Phase-Transitions Considering Plastic Deformations8th European Symposium on Martensitic Transformations, ESOMAT 2009 - 8th European Symposium on Martensitic Transformations,2009A. Menzel and T. WaffenschmidtRemodelling of anisotropic soft biological tissues. A computational micro-sphere approachX International Conference on Computational Plasticity, 2009 2008S. Ricker, J. Mergheim, A. Menzel and P. SteinmannContinuum-Atomistic Coupling based on Computational HomogenizationPAMM,8, 1, 10565-10566, 2008 2007J. Utzinger, A. Menzel and P. SteinmannInvestigation of microcracks in ferroelectric materials by application of a grain-boundary-motivated cohesive lawPAMM,7, 1, 4070017-4070018, 2007S. Ricker, A. Menzel and P. SteinmannTowards the computational homogenization of discrete microstructuresPAMM,7, 1, 4080021-4080022, 2007M. Dapino, A. Menzel, A. Arockiarajan and S. SivakumarStudies on ferroelastic time-dependent domain-switching effects of PZT ceramicsBehavior and Mechanics of Multifunctional and Composite Materials 2007,6526, 65260I-65260I-9, 2007R. Mohr, A. Menzel and P. SteinmannConservation properties of Galerkin-based time integrators for geometrically nonlinear elasto-plasto-dynamicsIMPLAST 2007, Symposium on Plasticity and Impact Mechanics, 431-438, 2007A. Menzel, A. Arockiarajan and S. SivakumarOn the modelling of domain switching in ferroelastic materialsProceedings of the 1st Seminar on The Mechanics of Multifunctional Materials, 5, 95-98, 2007R. Mohr, A. Menzel and P. SteinmannAssessment of Galerkin-based time integrators for nite elasto-plasto-dynamicsMultibody Dynamics 2007, 2007R. Mohr, A. Menzel and P. SteinmannConservation properties of Galerkin-based time-stepping schemes for nite elasto-plasto-dynamicsIX International Conference on Computational Plasticity, 2007S. Ricker, J. Mergheim, A. Menzel and P. SteinmannOn variational issues in the homogenization of discrete mechanical systemsMulti-scale Computational Methods for Solids and Fluids, 2007A. Menzel, M. Harrysson and M. RistinmaaOn a computational orientationdistribution-function-based remodelling frameworkProceedings of the 20th Nordic Seminar on Computational Mechanics, 2007 2006J. Utzinger, A. Menzel, E. Kuhl and P. SteinmannSimulation of Thermal Impact Welded Lightweight StructuresPAMM,6, 1, 201-202, 2006G. Himpel, A. Menzel, E. Kuhl and P. SteinmannTheory and Implementation of Time-Dependent Fibre Reorientation in Transversely Isotropic MaterialsPAMM,6, 1, 131-132, 2006S. Ricker, A. Menzel and P. SteinmannExistence of Solutions to the Linearized Spinning Wheel ProblemPAMM,6, 1, 653-654, 2006R. Mohr, A. Menzel and P. SteinmannGalerkin-based Time Integrators for Geometrically Nonlinear Elasto-PlastodynamicsPAMM,6, 1, 827-828, 2006A. MenzelAnisotropic Remodelling of Biological TissuesMechanics of Biological Tissue,91-104, 2006E. Kuhl, A. Menzel, K. Garikipati, E. Arruda and K. GroshModeling and Simulation of Remodeling in Soft Biological TissuesMechanics of Biological Tissue,77-89, 2006A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannStudies on nonlinear electromechanical behavior of piezoelectric materials using finite element modelingPiezoelektric Materials and Actuators, HNI-Verlagsschriftenreihe, Heinz Nixdorf Institut, 180, 2006A. MenzelComputational modelling of growth and remodelling of biological tissuesOberwolfach Reports, 2006 2005A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannA finite element modeling of piezoelectric materials with a superimposed stressPAMM,5, 1, 285-286, 2005G. Himpel, E. Kuhl, A. Menzel and P. SteinmannModelling of Mass Changes in Anisotropic MaterialsPAMM,5, 1, 299-300, 2005J. Utzinger, A. Menzel, E. Kuhl and P. SteinmannOn Well Posedness in Continuum Interface ProblemsPAMM,5, 1, 369-370, 2005G. Himpel, E. Kuhl, A. Menzel and P. SteinmannAnisotropic growth based on a multiplicative decomposition of the deformation gradientProceedings of the 1st GAMM Seminar on Continuum Biomechanics, Report No.: II, 69-78, 2005A. MenzelFibre reorientation for transversely isotropic and orthotropic tissue adaptationOberwolfach Reports, 2005A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannFinite element modeling of piezoelectric materials under electromechanical loading2005A. Menzel and P. SteinmannConfigurational forces in multiplicative elasto-plasticityComputational Plasticity 8, Fundamentals and Applications, 739-742, 2005A. Menzel, A. Arockiarajan, B. Delibas and W. SeemannMicromechanical modeling of rate dependent domain switching effects in piezoelectric materialsProc. Int. Conf. Comput. Exper. Eng. Sci., 2005R. Mohr, A. Menzel and P. SteinmannGalerkin-based time integrators for geometrically nonlinear elasto-plastodynamics - challenges in modeling and visualizationVisualization of Large and Unstructured Data Sets, S-4 of GI-Edition, Lecture Notes in Informatics (LNI), 185-194, 2005 2004G. Himpel, E. Kuhl, A. Menzel and P. SteinmannTheory and implementation of orthotropic materials in growing continuaPAMM,4, 1, 320-321, 2004E. Kuhl, A. Menzel and P. SteinmannAn open system approach towards the simulation of chemomechanically induced concrete failureProceedings of the 5th International Conference of Fracture Mechanics of Concrete and Concrete Structures, 547-554, 2004A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannA finite element model of piezoelectric material using a micromechanical approachProc. Appl. Math. Mech., 2004A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannNonlinear simulation of piezoceramic materials by micromechanical approach with probability functionProceedings of the 3rd International Conference on Computational Modeling and Simulation of Materials, 2004A. Arockiarajan, B. Delibas, A. Menzel and W. SeemannStudy of the behavior of piezoelectric materials under electromechanical loadingProceedings of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 2004R. Denzer, A. Menzel, F. Barth and P. SteinmannMaterielle Kräfte bei dissipativem Materialverhalten in der BruchmechanikM. Kuna, editor, DVM-Arbeitskreis Bruchvorgänge, 36. Tagung “Fortschritte der Bruch- und Schädigungsmechanik”, 2004 2003E. Kuhl, A. Menzel and P. SteinmannComputational modeling of biological growth phenomenaComputational Plasticity 7, Fundamentals and Applications in Barcelona, 2003A. Menzel, I. Carol and P. SteinmannA framework for (visco)plasticity coupled to anisotropic damageComputational Plasticity 7, Fundamentals and Applications in Barcelona, 2003T. Abdi, R. Sunyk, A. Menzel and P. SteinmannAnalysis of coupled finite element and atomistic modelsPAMM,3, 1, 240-241, 2003T. Abdi, R. Sunyk, A. Menzel and P. SteinmannOn the coupling of continuum atomistics and nite elementsProceedings of Luxfem - 1st International Conference on Finite Elements for Process in Luxembourg, 2003A. Menzel and P. SteinmannFormulation and computation of geometrically nonlinear anisotropic inelasticityComputational Mechanics of Solid Materials at Large Strains - Solid Mechanics and its Applications, 108, 181-190, 2003 2002M. Ekh, A. Menzel and K. RunessonA framework for hyperelasto-plasticity with kinematic hardening and anisotropic damageProceedings of the 15th Nordic Seminar on Computational Mechanics in Aalborg, 75-77, 2002 2001A. Menzel, M. Ekh, P. Steinmann and K. RunessonLarge strain plasticity coupled to anisotropic damage based on the fictitious configuration conceptProceedings of the 4th International ESAFORM Conference on Metal Forming in Liège, 245-248, 2001A. Menzel and P. SteinmannA theoretical and computational framework for anisotropic inelasticityProceedings of the European Conference on Computational Mechanics in Cracow, 2001 2000A. Menzel, P. Steinmann and I. CarolA geometrically nonlinear framework for continnuum damage mechanicsProceedings of ECCOMAS'00 in Barcelona, 2000 1999A. Menzel and P. SteinmannOn the formulation of higher gradient single and polycrystal plasticityProceedings of EMMC2 (EUROMECH-MECAMAT'97) in Magdeburg, 234-241, 1999A. Menzel and P. SteinmannA theoretical and computational setting for geometrically nonlinear damage mechanicsProceedings of the European Conference on Computational Mechanics, 1999 1998A. Menzel and P. SteinmannAspects of the motivation and the formulation of higher gradient plasticity for single and polycrystals165-170, 1998